The Sleepuds connect to the Smart Charging Case using Bluetooth Low Energy (BLE). 

These must make solid contact with the base of the charging pins on the Smart Charging Case in order to charge.

Sleepbuds come with 4 differest size Silicone tips to ensure a proper fit.

0 — Extra Small

1 – Small

2 — Medium

3 — Large

• Bluetooth connection to phone/tablet
• Bluetooth Low Energy (BLE) connection to the Sleepbuds
• Temperature Sensor
• Microphone
• Charging cradle for Sleepbuds.

The Sleepbud charging pads must be seated on these in order to charge.

The 5 LEDs in the center of the case are used to communicate connecting, connected, charging, charge, pairing mode and updating states of the case.

The right and left LEDs are used to communicate connecting, connected, charging, and charged states of the Sleepbuds.

Open the Smart Charging Case’s lid to intiate the Bluetooth connection to your phone/tablet.

Use this text to share information about your brand with your customers. Describe a product, share announcements, or welcome customers to your store.

Located on back of case, the Factory Reset button is used to reset your Sleepbuds and Smart Charging Case to the factory settings. Insert a thin paper clip into the hole and press until you feel a click.

The supplied Charging Cable uses a Standard USB A to USB C connector. The USB C side of the cable plugs into the back of the Smart Charging Case. The larger USB A side of the cable must be plugged into a power source.