Dubslabs Bedphones Sleep Headphones Specs

Falling asleep with headphones on isn’t a new idea, but finding ones that don’t bug you all night? That’s trickier. Enter the Dubslabs Bedphones Sleep Headphones, a pair built from the ground up to sit comfortably on your ears while you drift off to music, podcasts, or whatever else you like to listen to. This article digs into the nitty-gritty of what these headphones are all about, breaking down their specs and features in a way that’s easy to wrap your head around. 

What Are the Dubslabs Bedphones Sleep Headphones?

The Bedphones Sleep Headphones come from Dubslabs, a company started back in 2011 by an engineer who wanted something better for bedtime listening. They’re designed to be thin and lightweight, sitting flat against your ears instead of jamming into them like earbuds or hulking over your head like traditional headphones. You’ve got two versions to pick from: wired and wireless. Both aim to keep things simple and functional, letting you listen to audio with a design focused on comfort.

The Basics of the Design

These headphones aren’t your average audio gear. They’re made to be unobtrusive, with a focus on keeping things comfy when your head’s on a pillow. Here’s what stands out about their build:

1. Thin Profile: At less than a quarter-inch thick, they’re slim enough to avoid pressing into your ears while you’re lying down.

2. On-Ear Setup: Unlike earbuds that go inside your ear canal, these sit on top, covered in soft foam to keep things gentle.

3. Adjustable Earhooks: They use a flexible memory wire coated in rubber, so you can tweak the fit to match your ears and keep them in place.

The idea is straightforward: make headphones you can wear lying down without feeling them too much. Whether that works for everyone depends on how you sleep, but the design’s got a clear purpose.

Breaking Down the Specs

Let’s get into the details of what these headphones bring to the table. The specs differ a bit between the wired and wireless versions, but they share a core setup. Here’s the rundown.

Physical Dimensions and Build

• Size: Both versions stretch about 12.5 inches high, 1.5 inches long, and 0.5 inches wide, counting the cable and earpieces together.

• Thickness: The speakers are under 0.25 inches thick, keeping them low-profile.

• Weight: Clocking in at around 30 grams (just over an ounce), they’re light enough to barely register.

• Materials: The earhooks are flexible, rubber-coated memory wire that bends without snapping back too hard, while the speakers sport foam padding on the ear side (about 2mm thick) and a hard plastic shell on the outside. They’re built to feel almost weightless, which matters when you’re settling in for the night.

They’re light, too, barely noticeable in terms of weight, which is a big deal when you’re trying to relax.

Audio Components

• Drivers: Each earpiece has a 23mm full-range driver, which handles the sound output. It’s not high-end audiophile stuff, but it’s solid for casual listening.

• Sound Quality: The wireless version uses a CSR chip to manage audio, aiming for clear playback. It’s decent for spoken word or soft tunes, though don’t expect booming bass.

The focus here isn’t on blowing you away with sound, it’s on keeping things steady and clear enough to enjoy while you wind down.

Connectivity Options

The wired and wireless models split off in how they hook up to your device:

1. Wired Version:

• Uses a standard 3.5mm headphone jack.

• Needs an adapter for newer phones with Lightning or USB-C ports.

• No battery to worry about ,just plug and play.

2. Wireless Version:

• Runs on Bluetooth, syncing with iPhones, Androids, or anything else with Bluetooth capability.

• Range is decent but sensitive, your phone needs to stay close, like on your nightstand, for a stable connection.

The wireless option gives you more freedom to move, while the wired one keeps it simple and tangle-free if you don’t mind the cord.

Battery Life (Wireless Only)

• Duration: Up to 13 hours on a full charge.

• Battery Location: Tucked into a small plastic shell hanging off the left earhook.

• Charging: Comes with a USB-to-micro-USB cable; plug it into the remote on the side.

Thirteen hours is plenty for overnight use, and maybe even a couple of nights if you’re just playing short sessions. It’s a practical spec for something meant to last through your sleep.

Controls and Microphone

Both versions come with an inline remote and mic, but they’re slightly different:

• Wired: Single-button remote for play/pause/skip and answering calls.

• Wireless: Three-button remote, adding volume control to the mix alongside play/pause/skip and call functions.

The mic works fine for quick calls, and the buttons mean you don’t have to grab your phone every time you want to switch tracks.

Speaker Impedance and Frequency Response

• Impedance: The speakers sit at 32 ohms, a standard resistance that works with most devices without needing extra juice.

• Frequency Response: They cover 20 Hz to 20 kHz, the typical human hearing range. Lows (like soft hums) and highs (like sharp voices) come through, though the focus stays on mids for clear speech and melodies.
  These specs keep the audio balanced for casual use, no surprises, just steady playback.

Bluetooth Version and Codec Support (Wireless Only)

• Bluetooth Version: Uses Bluetooth 4.0, an older but reliable standard for short-range connections.

• Codecs: Supports SBC, the basic Bluetooth audio codec, keeping sound quality decent without fancy extras like aptX.
  It’s not cutting-edge, but it gets the job done for streaming from your phone or tablet.

Cable Length and Durability (Wired Only)

• Length: The cable stretches about 4 feet (1.2 meters), long enough to reach from your head to a nearby device.

• Durability: It’s a braided design with a rubbery coating, built to handle some twisting and tugging without fraying fast.
  Plenty of reach for bedside use, and it’s tougher than your average flimsy cord.

What’s in the Box?

When you get a pair of Bedphones, here’s what you’ll find inside:

Wired Version Contents

1. Bedphones headphones with 3.5mm jack.

2. Carrying case (soft fabric pouch).

3. Satin eye mask.

4. Replacement foam pads for the speakers.

Wireless Version Contents

1. Bedphones headphones with Bluetooth.

2. Travel pouch.

3. Satin eye mask.

4. USB-to-micro-USB charging cable.

5. Replacement foam pads.

The eye mask is a nice touch if you’re into blocking out light, and the replacement foams mean you can swap them out if they wear down.

Compatibility and Pairing

Getting them connected is pretty straightforward.

Wired Setup

Plug the 3.5mm jack into your device. If you’ve got a newer phone without a headphone port, you’ll need an adapter (not included). That’s it, no setup, no charging.

Wireless Pairing

For the Bluetooth model:

1. Turn them on (usually a button on the remote).

2. Open your device’s Bluetooth settings.

3. Look for “Bedphones Wireless” and pair it.

Keep your phone within a few feet, think bedside table range, and it should stay connected without hiccups. If it drops, it’s likely just too far.

Things to Keep in Mind

No product’s perfect, and the Bedphones have their quirks.

Potential Downsides

1. Fit Issues: Some find the wire uncomfortable after a while, especially side sleepers.

2. Sound Leakage: They don’t seal noise in, so your partner might hear faint audio if it’s loud.

3. Durability: A few folks report one side failing after months of use, nothing widespread, but it’s happened.

Not Noise-Canceling

These aren’t built to block out all sound. They play audio over outside noise, but don’t expect total silence from the outside world.

Volume Limits

The lowest volume might still feel too loud for some, especially if you’re used to quieter earbuds. You’ll need to adjust on your device to dial it back.

Other Sleep Helper to Explore

Ozlo Sleepbuds®

An amazingly restful and peaceful sleep every night, free from distractions and noise, is the greatest gift you can give!

What are Ozlo Sleepbuds?

Ozlo is a science-driven, one-stop-shop for the best sleep of your life. Unlike other headphones and earbuds, our tiny Sleepbuds® are engineered to be super comfy, even for side sleepers, while blocking out sleep-disrupting sounds.
Sleepbuds® play audio for up to ten hours, letting you enjoy our noise-masking tracks or stream anything you like, including audiobooks, podcasts, white noise, and YouTube.

The Ozlo Difference

At Ozlo, we're dedicated to helping you achieve the best sleep possible through innovative audio solutions. Our company, founded by three former Bose engineers, focuses on creating products that not only help you fall asleep, but stay asleep throughout the night.

Ozlo Sleepbuds® simply don’t feel like other earbuds. Sleepbuds stay in place even when you toss and turn. The tiny earbuds, with their comfortable silicone tips and anchor-in-place wings, are designed for all-night comfort, no matter your sleeping position. Sleep on your back, side, or whatever works for you, and Ozlo Sleepbuds® will remain in place throughout the night.

Key Highlights

• Founded by three former Bose engineers with extensive experience in audio tech
• Sleepbuds® actively mask unwanted sounds like snoring, traffic, and environmental noises with calming, science-backed audio.
• Ultra-soft silicone tips designed to support every sleeping position, ensuring a secure and comfortable fit.
• Up to 10 hours of continuous use with extra charges from the Smart Case.
• Built-in biometric and environmental sensors offering personalized sleep reports
• Personal alarm gently wakes you without disturbing your partner

Learn More

Conclusion

So, there you have it, the Dubslabs Bedphones Sleep Headphones in all their stripped-down glory. They’re a solid pick for anyone who enjoys some audio at night, whether that’s a podcast, some mellow tunes, or just something to play over the background hum. With their thin build, adjustable fit, and wired or wireless options, they’re clearly made for folks who want to keep things simple and comfy without a lot of fuss. They’re not perfect, side sleepers might fidget with the fit, and the sound won’t blow your socks off, but they work well for their intended purpose.

At the end of the day, the Bedphones are about practicality. They’re lightweight, easy to pack, and let you listen on your terms, whether you’re in bed or on the go. For those who’ve struggled with bulky headphones or earbuds that feel like a nuisance by morning, these could be worth a look. It’s all about finding what clicks for your routine, and the Bedphones offer a no-nonsense option to play around with.

FAQs